Sealing Your Masking Tape for Better Hard Edges in Acrylic Painting

How to Use a Paint Edging Tool?

A paint edging tool may look a little daunting at first.

But once you get the hang of it, the edger can save you a considerable amount of time and effort.

When using a paint edging tool, you can paint around floorboards, window trim, and the like with greater confidence.

What follows are a few tips that will help you gain experience with a paint edging tool.

How Does It Work?

A typical paint edger will consist of a pad that features bristles and a couple of wheels on one side.

Basically, you put in the paint, align the pad with the edge, and keep the wheels on the outside.

Then you can run the pad along the edge to paint the molding or trim as needed.

You will need to prep the area first to ensure that the pad runs smoothly and in a straight line.

When done properly, you will have a smooth edge to the paint.

It takes a little practice, but it can be done if you focus on the basics.

1- Prepare

Lay down a drop cloth, tape off areas that you do not want to have painted, and then wipe down the surface.

This only takes a moment, so do not rush the process, but do not dawdle or become overly concerned.

2- Set-Up

You will need the following.

  • Paint Edger
  • Rolling Tray
  • Paper Plate

The paper plate can hold the paint and be thrown away when no longer needed.

The rolling tray will be used to remove any excess paint after you edge.

Now you will need to apply a liberal amount of paint to the pad and you are ready to go.

3- Apply the Edger

Once the edger is coated with paint, the ridges of the rolling tray can be used to remove any excess.

Now, roll the edger along with the trim or molding. Be sure to use a nice, even stroke to apply the paint smoothly.

And that is basically it. You may apply a second coat if you want a darker color or if you need more thickness.

And remember to clean the edger once you are done.


​Final Verdict

​​Now we hope this paint edger reviews guide will help you to find the best paint edging tool, and it will save your money and time as well.

Overall, the Accubrush is the best brand, and we recommend you to purchase number one, two, three. But if you want, you can read the full content and purchase one that you like!

Important Reads:

​1. ​Exterior Paints for 2021

2.​​​ ​Paints for Vinyl Surfaces for 2021

3. ​Some Commercial Paint Sprayers

2. Tone and Color

The transition between similar values and colors is always softer than the shift between contrasting values and colors.

For example, if two contiguous shapes are a blue vase and a green tablecloth with the same value, the edge between the two will be lost.

However, an illuminated white vase on a dark background will create a crisp edge.

4. Yukaki Paint Pad Set

The Yukaki Paint Pad Set comes with everything you need to do for a professional quality job. It includes three pads shaped for tackling tricky nooks and crannies and a deep tray with a built-in wheel for removing excess paint.

A suitable paint edger eliminates the hassle of cutting in, masking tape, painter’s tape, or any other standard tools and techniques. Yukaki paint pad set allows you to do more coverage to complete a wall for a smoother finish.

YUKAKI Paint Pad Set More Accurate Painting Tool with Paint Tray Paint Edger and… Multi-function paint pads set,essential tools for home…Also can be used as deck staining applicator. Perfect…No need for tape to get those perfect lines as you…Package include: 1 x Large Coverage Paint Pad, 1 x… See on Amazon

Working in a field with complexities such as wall fixtures and crown molding increases the time you take when taping. However, this product will help you cut downtime and paint the edges of a baseboard or other surfaces effortlessly.

Yukaki Paint Set features teardrop and elongated pad shapes for the significant release of paint on the surface. The tool allows you to cut into molding and corners to ensure that trims and edges are not neglected and shabby.

The tool eliminates the chaos of freehand painting, cutting in, masking tape, and painter’s tape. You won’t run the paint directly alongside areas that you don’t need to paint, making it an ideal choice for below the crown molding, around window and door trim.

Yukaki Paint Pad Set features plastic construction and an ergonomic handle that allows you to paint effortlessly. It’s an ideal option if you want to paint walls, baseboards, and the juncture between two walls like accent walls.

The package includes a broad coverage paint pad, a paint edger, one tray, and a small paintbrush. It comes with a 30-day money guarantee and removable grips for attaching the rods. Given its price and overall functionality, the Yukaki Paint Pad is an ideal edge painting choice. However, it’s not the best for repeated uses since you can wash and reuse the pads.

Main features

  • Elongated teardrop pad shapes
  • Ridges on grips to prevent slipping
  • Great for painting around fixtures

See on Amazon

Popular Posts

Edward Tools Paint Trim Guard

The most basic tool to aid in trim painting is a long metal guard like this one from Edward Tools. The stainless steel blade is durable, rust-resistant and easy to clean. (It also comes with a lifetime warranty.) The thin blade minimizes visual obstruction, allowing you to get as close as needed to ensure a quality edge.

This is another tool that can be used when painting trim or edging up to it. Pro tip: We see a lot of apprentice painters make the mistake of pulling the guard across the trim when resetting. This movement draws paint across the trim surface, ruining the entire effect. Avoid this by pulling out and away at an angle, wiping any accumulated paint from the shield with a rag. It only takes a second or so to do this, and it’s far faster than pre-taping or trying to clean up besmirched trim after the fact.

If you don’t want to buy a dedicated trim guard, you can use a wide drywall mud knife instead. The shorter the blade length the more often you’ll have to reset.

Shop Now

The Degrees of Squinting

  1. Eyes wide open – loads of details
  2. Eyes closed a tiny fraction – you start to simplify your subject, you see fewer details, some of the values start to merge, softer edges begin to be less clear.
  3. Close your eyes a bit more – Smaller shapes get absorbed into stronger ones, darker shapes lose their details.

Notice which elements do not lose their integrity, those will be your strong elements. The sharpest edge of all is the last one to disappear before you close your eyes.

Look at the pictures below:

Picture 1. If I wanted to paint this, I’d start by understanding what kind of value structure and edges there are in this landscape.

Picture 2. Squinting, the last edges to disappear are the ones of the tree against the light sky (1), so that would be where I locate my sharp edges, which will determine where the eye of the viewer would be first drawn to, my area of focus.

The first edges to disappear when squinting are the lost edges, and those are in the vegetation on the left and within the ground on the right (3). Soft edges are located in many parts of this scene, especially where the light meets the vegetation (2).

Picture 1: If I wanted to paint this beautiful landscape, I’d start by understanding what kind of value structure and edges there are in this scene.1 / 2

How to Use the Accubrush MX Paint Edger

Slow and steady is the key with DIY repainting, ta
Slow and steady is the key with DIY repainting, take it a wall at a time for best results.

While the best paint edger tool makes your home painting projects less effort, it’s not a foolproof solution to a poor paint job. When used correctly, you can get straight edges on your walls fast. Ignore the instruction or misuse the tool, and you’ll have a wreck of a paint job with mounting frustrations. Follow these easy steps for making your life easier:

  1. Swing the guard out of the way from the side of the roller. You don’t want any paint on it since it’s pressed against the surface you don’t want to be painted.
  2. Load the roller with paint. Take your time to load the entire roller with an even coat of paint.
  3. Roll out on the wall. Away from the edge, with the guard open, roll out a few strokes to even the paint on the roller. 
  4. Move the guard into place. Swing the paint guard into place next to the paint roller.
  5. Start high and roll the edger down. Starting six inches from the wall’s edge, roll down and in until the guard presses against the trim.
  6. Move the roller back and forth until the paint’s even.
  7. Use the roller to feather out the paint into the wall.

While it takes a little practice to get skillful with the Accubrush MX Paint Edger, the added features make it easy for first-time painters to get perfect lines right out of the paint tray.

  • Use even pressure on all four corners of the edger tool. Tilting it forward or back causes the brush to lose contact with the wall, compromising the line.
  • Remove the edging brush and soak it in water between coats. A wet brush will create a more even and straight paint line.

Luigi Paint Pads

The self-proclaimed “World’s best paint pad” consists of three angled pads and a tray. And they’re very useful tools for novice painters intimidated by the notion of cutting in edge paint.

Paint pads are essentially thin sponges on a plastic handle. With no bush marks, the edging paint will blend well with roller-applied wall body paint. They’re easier to apply an even coat, and just a bit of lip that extends past the pad edge, so they have very good line of sight to your trim line. The downside of sponges is that they hold less paint and require more frequent refilling. They also aren’t as durable as brushes. (Those two factors of speed and durability are why most pros only use sponge brushes on occasion.)

What we like about this edging set is the variety of sizes and angles the pads come with. Chances are good that no matter what kind of profile you need to paint, one of these pads will be able to tackle it. To the best of our knowledge, there is no Mario companion kit planned as of yet.

Shop Now

Paint Edging FAQs

A paint edger is perfect for high-stakes accent wa
A paint edger is perfect for high-stakes accent walls, like this southwestern black and white bedroom.
  • What is cutting in paint?

Cutting in is when you have two adjacent colors, and you need a straight line to separate them. You cut in against trim, molding, adding an accent wall to a room, and at the ceiling and floor. It’s vital to get the cutting in line straight for a professional finished product.

  • How do you paint edges neatly?

Using a paint edger gives you straight lines, without the hassle of using painter’s tape. With a high-quality paint edger, like the Accubrush MX or HomeRight Quick Painter, you can paint neat edges along the ceiling, trim, or for an accent wall and do it fast.

  • Do you cut in before or after painting?

You can do it either way. Some people prefer cutting in first because they can work back over the edge paint with the roller to get an excellent overlap. But rolling first lets you see how close you can get with the roller, minimizing the time you spend cutting in. However, you must do a single coat of both cutting in and rolling at a time. Don’t do two layers along the edges and then roller the wall, as you won’t be able to get the paint even.

  • How do you get rid of cutting in lines when painting?

There’s nothing more frustrating than stepping back from a finished paint job and seeing your cutting in lines. To prevent future aggravation, take a few extra steps when you’re painting.

  1. Box your paint: combine all your gallons of paint and mix them to eliminate slight variations between batches.
  2. Overlap cutting lines with your roller: paint six to eight inches into the wall while you’re cutting in, and overlap with the roller as close to the edge as you can. The overlapped section will help blend the cutting lines.
  3. Overlap fresh paint: don’t let your edges dry before going over with a roller.
  4. Avoid cheap paint: it`s unfortunate, but the lower quality paint, the more issues you’ll encounter. Shell out a few extra bucks per gallon, and you’ll save yourself a lot of future headaches.
  • Is there a tool for cutting in when painting?

The traditional tools for cutting in are painter’s tape and a brush, or just a brush for those with steady hands. While using a paint edger isn’t acceptable for every situation, it’s an excellent tool for cutting straight lines fast for DIY jobs and painting properties you’re leasing.

  • Is it okay to cut in one day and paint the next?

In a word, yes. With a caveat, you’ll get better and more professional results if you work a single wall and don’t let the paint dry between rolling and edging. You’ll be able to blend better and get the best-looking room possible. If you have a busy schedule, you may opt for finishing just a step at a time.


Leave a Reply

Your email address will not be published. Required fields are marked *

Go up